NX6102 Matte Additive

TECHNICAL INFORMATION

Ideal Fabric–All type fabrics when used with appropriate ink and or under-base for application.

Mesh–Consult TDS of ink that this additive is being mixed into.

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing–Consult TDS for ink that the additive will be mixed into.

Additives–NX6390 Viscosity Reducer 1-3% by weight if necessary after additive has been mixed into the ink.

Storage–30C/84F in tightly closed containers

Cleaning–Enviro Series TR Blend or 2000 Green

 

CAUTION
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.