Lancer Group’s STI7700 Silicone Glitter Series is a eight silicone rubber colours formulated from the STI7700 Clear Base. Prints made with this series will have a stunning, sparkling effect and exhibit extremely high-stretch in the finished decoration when printed on performance wear fabrics. When printing on dark colours, sub-dyed fabrics or fabrics known to migrate, colours may need to be underbased with STI7581 White and backed with STI7911 Defender Black Dye Blocker for best results. Multiple coatings of direct emulsion that produce thicker stencils may also be necessary to achieve desired effect. Note: This ink must be catalyzed prior to printing.
TECHNICAL INFORMATION
Ideal Fabric— 100% Polyester Performance wear fabrics.
Mesh–83-125/inch (32T-48Tcm) High Density Inks – 83-125/inch (43T-48Tcm)
Squegee–70 durometer or 70/90/70 Triple Durometer.
Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.
Curing–250-290F (125-147C) for 1.5 to 2 minutes.
Additives–Viscosity Reducer 3-4% by weight maximum.
Storage–30C/84F in tightly closed containers
Cleaning–Enviro Series TR Blend or Mineral Spirits
CAUTION
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.