Lancer Group’s STI7838 Silicone Direct Print High Density Clear is an extremely thick silicone rubber clear that produces 3D high-density gel decorations when overprinted on other silicone ink colours. Finished prints made with STI7838 will have a thick, extremely high gloss or wet look with sharp edges and a flat surface. It also produces excellent results when printing a tone-on-tone effect. When printing on dark colours, sub-dyed fabrics or fabrics known to migrate, all colours must be underbased with STI7581 White and backed with STI7711 Defender Black Dye Blocker. A print/flash/print technique, building up layers of the clear may be necessary. Multiple coatings of direct emulsion or capillary films that produce thicker stencils may also be necessary to achieve desired effect. Note: This ink must be catalyzed prior to printing.

TECHNICAL INFORMATION

Ideal Fabric— 100% Polyester Performance wear fabrics.

Mesh–83-125/inch (32T-48Tcm) High Density Inks – 83-125/inch (43T-48Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing–250-290F (125-147C) for 1.5 to 2 minutes.

Additives–Viscosity Reducer 3-4% by weight maximum.

Storage–30C/84F in tightly closed containers

Cleaning–Enviro Series TR Blend or Mineral Spirits

 

CAUTION
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.