Evolution NX6820 Puff Ink Series is a PVC-free and phthalate-free specialty ink designed for producing stunning 3D effects in designs.   When printing on 50/50 or 100% polyester fabrics the appropriate under-base such as NX6710 Defender Grey Dye blocker or NX6711 Defender Black dye blocker must be used under the colour to eliminate dye migration.   The height of the 3D effect can be controlled by using coarser meshes for higher effects and finer meshes for more subtle effects.   The base can be mixed with Evolution Pigment Concentrates to mix Pantone colours, standard colours or custom colours.

TECHNICAL INFORMATION

Ideal Fabric— 100% Cotton

Mesh–83-125/inch (32T-48Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any stencil compatible with plastisol ink

Curing–Gel 220°240° F (99°-116° C). Full Cure–300°-340°F (160°-171°C) for 1 1/2 – 2 minutes

Storage— Store at temperatures less than 30°C (84° F)

Cleaning— Enviro Series 200 Green & Enviro Series TR-Blend

Colours– Mixing Base (NX6820MB), Black (NX6820BK), White (NX6820WH).

CAUTION
Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.