Evolution NX6600 Series Process inks are a PVC-free series of four-color
process inks to be printed directly on 100% cotton white or light-colored
fabrics as well as on top of dye discharge underbases like the Aqua Series
Dye Discharge DC-2012 or DC-2018. Because Lancer Group International
disperses their own pigments to exacting standards, this quality control of
the entire process guarantees printers a completely PVC-free, four-color
process ink series that will accurately reproduce their images each and
every time.

TECHNICAL INFORMATION

Ideal Fabric— 100% Cotton, Poly/Cotton Blends or 100% Polyester Fabrics (With Defender   Dye Blocker)

Mesh–230-305/inch (92T-120Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any stencil compatible with plastisol ink

Curing–Gel 220°240° F (99°-116° C). Full Cure–275°-320°F (135°-149°C) for 1 1/2 – 2 minutes

Storage— Store at temperatures less than 30°C (84° F)

Cleaning— Enviro Series 200 Green & Enviro Series TR-Blend

CAUTION
Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.