NX6136 Fast Flash Additive

TECHNICAL INFORMATION

Ideal Fabric–Consult TDS for ink that the additive will be mixed into.

Mesh–Consult TDS for ink that the additive will be mixed into.

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing–Consult TDS for ink that the additive will be mixed into.

Additives–NX6390 Viscosity Reducer 1-3% by weight.

Storage–30C/84F in tightly closed containers

Cleaning–Enviro Series TR Blend or Mineral Spirits

 

CAUTION
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.