Evolution NX6135 High Density Additive when added to any color of Evolution NX Series
PVC-free and phthalate-free inks transforms the flat ink into an ink capable of producing
3D-effects when printed through thick stencils. The thick stencil can be produced with
capillary films or by building up the bottom of the screen by multiple coats of direct
emulsion. Simply add 20% by weight to desired ink and mix thoroughly. A
print/flash/print technique with an off-contact adjustment between layers may be
necessary to produce desired results.

TECHNICAL INFORMATION

Ideal Fabric— 100% Cotton

Mesh–80-110/inch (32T-43Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any stencil compatible with plastisol ink

Curing–Gel 220°240° F (99°-116° C). Full Cure–275°-320°F (135°-149°C) for 1 1/2 – 2 minutes

Storage— Store at temperatures less than 30°C (84° F)

Cleaning— Enviro Series 200 Green & Enviro Series TR-Blend

CAUTION
Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.