(800) 665-4875 (800) 498-6675

AquaPRO

The AquaPro Series is an improved, next generation Water based textile ink that is specifically formulated for printing on automatic presses.  AquaPro’s ability to rewet itself creates longer open stencil time resulting in faster production speeds and less downtime.  It flashes quickly with low after flash tack creating less need for cool down time when printing multi colour designs.  AquaPro not only produces brilliant, soft hand prints on dark garments that will stretch and retract easily but, also have excellent adhesion to a wide variety of substrates such as spandex, leather, lycra, cotton/poly blends and porous nylons.  Prints made with AquaPro are fully washable and can be dry cleaned. In low-humidity environments an addition of 5-30% by weight of 5194 AquaLife Retarder will greatly extend stay-open time.

AquaPro base is compatible any water base pigment concentrate including Aqua Series PCWB to create a wide range of high opacity colours.

TECHNICAL INFORMATION

Available Colours: 5581 AquaPro White, 5504 AquaPro Base

Ideal Fabric: 100% Cotton White, Black or Coloured Fabrics.

Mesh: 83-230/inch (32-90Tcm)

Squegee: 60 or 65/90/65 Triple Durometer

Stencil: Water-proof stencils.

Curing: 320°F (160° C) for 90 seconds.

Pigment Loading: Up to 15%

Additive: 5-30% by weight AquaLife Retarder.

Storage: 60°-86° F (15°-35°C) with lids closed.

Cleaning: Warm water immediately after printing and use Enviro Series 2000 Green for difficult spots.

CAUTION
Always test finished prints for curing, adhesion, opacity and desired look prior to beginning full production run.  Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free, phthalate-free or formaldehyde-free if any additive other than an additive recommended and manufactured by Lancer Group International is used to modify this ink.