Excalibur’s 1051 PF ColorPro is a high-opacity color mixing system that produces simulated Pantone® colours, and custom shades. It consists of 11 standard ready-for-use colors and five additional components called Boosters. Booster Colours are very intense shades of Yellow, Red, Blue and Green. When added in increments between 5%-40% they will increase the brightness and color accuracy of specific colours. Most generally the colors in the

1051PF mixing formulas that need boosting are any colours that do not contain white. They generally can be found in the three colours located in the center of each page in the Pantone® “C” Formula Guide. All Pantone® colour formulas contained in the ColorPro Software that will benefit in accuracy with the addition of Booster Colours are presently being updated and added to the software as they are formulated.


  • Creamy, easy-printing consistency produces sharp, opaque prints on both manual and automatic presses whether you are printing directly on top of a white or light colored 100% cotton garment or on top of a flashed white underbase.
  • Completely phthalate-free and lead-free formulation complies with all standards of Consumer Product Safety Improvement Act (CPSIA) banning phthalates and heavy metals in textile-printing inks.


Gel Temperature: Ink will surface gel at 240° F (116° C).

Curing: Prints will fully cure when the entire ink film reaches 270°F (132°C) for at least 15 seconds.

Mesh: For direct printing a 83-230/inch (32T-92Tcm) may be used.

Stencil: Any stencil compatible with plastisol inks may be used.

Squeegee: 70 durometer or 90/70/90 triple durometer blades are recommended.

Clean-up: Use Enviro Series 2000 Green or Enviro Series TR Blend.

Software Information: Please Click Here for software updates and downloads.



Transparent Mixing Base (1004), Opaque Mixing Base (1050), LC White (1081), LC Black (1033-BK), LC Matte Black (1033-MBK), LC Aqua (1033AQ), LC Blazer Gold (1033BG), LC Bright Royal Blue (1033BR), LC Bright Scarlet Red (1033BS), LC Burnt Orange (1033BO), LC Cardinal Red (1033CR), LC Chrome Green (1033CG), LC Collegiate Golden Yellow (1033CGY), LC Columbia Blue (1033CB) , LC Dark Brown (1033DB), LC Deep Purple (1033DP), LC Gold (1033GO), LC Grey (1033GY), LC Kelly Green (1033KG), LC Lemon Yellow (1033LY), LC Light Orange (1033LO), LC Maroon (1033MA), LC Michigan Yellow (1033MY), LC Navy Blue (1033NB), LC Orange (1033OR), LC Royal Blue (1033RB), LC Scarlet Red (1033SC), LC Texas Orange (1033TO), LC Vegas Gold (1033VG), SP Defender Grey Dye Blocker (1596) and SP Defender Black Dye Blocker (1597)


Always test finished prints for curing, adhesion, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this mixed ink will test phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are phthalate-free and lead-free are available upon request.