The AquaPrint Series is an improved, next generation Water base textile ink that is specifically designed for printing on a manual carousel or table. AquaPrints’s ability to rewet itself creates longer open stencil time resulting in faster production speeds and less downtime. It’s soft smooth consistency allows for easy manual printing through a wide range of mesh counts.   AquaPrint not only produces brilliant, soft hand prints on dark garments that will stretch and retract easily but, also displays excellent adhesion to a wide variety of substrates such as spandex, leather, lycra, cotton/poly blends and porous nylons.  Prints made with AquaPrint are fully washable and can be dry cleaned. In low-humidity environments an addition of 5-30% by weight of 5194 AquaLife Retarder will greatly extend stay-open time.

AquaPro base is compatible with any water base pigment concentrate including Lancer’s Aqua Series PCWB to create a wide range of high opacity colours.

TECHNICAL INFORMATION

Available Colours: 5581 AquaPro White, 5504 AquaPro Base

Ideal Fabric: 100% Cotton White, Black, or Coloured Fabrics

Mesh: 83-230/inch (32-90Tcm)

Squegee: 60 durometer or 65/90/65 Triple Durometer.

Stencil: Water-proof stencils.

Curing: 320°F (160° C) for 90 seconds.

Pigment Loading: Up to 15%

Additive: 5-30% by weight AquaLife Retarder.

Storage: 60°-86° F (15°-35°C) with lids closed.

Cleaning: Warm water immediately after printing and use Enviro Series 2000 Green for difficult spots.

CAUTION
Always test finished prints for curing, adhesion, opacity and desired look prior to beginning full production run.  Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free, phthalate-free or formaldehyde-free if any additive other than an additive recommended and manufactured by Lancer Group International is used to modify this ink.