The Evolution Silicone Pearlescent Ink Series contains seven colours to produce shimmering special effect prints on smooth fabrics constructed of 100% polyester fabrics. It is especially formulated to be used on lyrcra/spandex due to its excellent elongation. The gloss finish and smooth hand feel produces very pleasing results when printed on any fashionable
garment. A thicker ink stencil with multiple coats of emulsion on the bottom side of the screen, or a print/flash/print technique may be necessary to produce the desired special effects. If printing on sub-dyed fabrics or dark fabrics, it may be necessary to underbase this ink series with either STI7781 Silicone White or STI7711 Silicone Defender Black Dye Blocker.


Ideal Fabric— 100% Polyester Performance wear fabrics.

Mesh–83-125/inch (32T-48Tcm) High Density Inks – 83-125/inch (43T-48Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing–250-290F (125-147C) for 1.5 to 2 minutes.

Additives–Viscosity Reducer 3-4% by weight maximum

Storage–30C/84F in tightly closed containers

Cleaning–Enviro Series TR Blend or Mineral Spirits


Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.