STI Solar Change
Ideal Fabric— 100% Polyester Performance wear fabrics.
Mesh–83-125/inch (32T-48Tcm) High Density Inks – 83-125/inch (43T-48Tcm)
Squegee–70 durometer or 70/90/70 Triple Durometer.
Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.
Curing–250-290F (125-147C) for 1.5 to 2 minutes.
Additives–Viscosity Reducer 3-4% by weight maximum
Storage–30C/84F in tightly closed containers
Cleaning–Enviro Series TR Blend or Mineral Spirits
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.