A special-effect inks used to produce finished colours with the Evolution Pigment Concentrates. Finished, ready-for-use inks are also available in black and white. Combined with a 150-700 micron capillary film stencil, NX6835 produces a thick, three-dimensional print that after curing will have square corners and a perfectly smooth flat surface.
Ideal Fabric— 100% Cotton
Squegee–70 durometer or 70/90/70 Triple Durometer.
Stencil–Any stencil compatible with plastisol ink
Curing–Gel 220°240° F (99°-116° C). Full Cure–300°-340°F (160°-171°C) for 1 1/2
– 2 minutes
Pigment Load— 20% Maximuim
Storage— Store at temperatures less than 30°C (84° F)
Cleaning— Enviro Series 200 Green & Enviro Series TR-Blend
Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.