Evolution’s Glow-In-The-Dark PVC-free ink produces a dramatic special effect where the
print will glow yellow-green in darkness or low-light situations. Light will penetrate through
the clear base activating the pigment creating a bright, and long lasting glow effect when the
printed garment is worn in a dark environment. Because the pigment may settle to the
bottom of container during storage it is always wise to stir the ink prior to printing.


Ideal Fabric— 100% Cotton

Mesh–110-160/inch (44T-64Tcm)

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any stencil compatible with plastisol ink

Curing–Gel 220°240° F (99°-116° C). Full Cure–275°-320°F (135°-149°C) for 1 1/2 – 2 minutes

Storage— Store at temperatures less than 30°C (84° F)

Cleaning— Enviro Series 200 Green & Enviro Series TR-Blend

Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.