NX6700 Stone Print
Ideal Fabric–All type fabrics when used with appropriate underbase.
Squegee–70 durometer or 70/90/70 Triple Durometer.
Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.
Curing–Gel 220°240° F (99°-116° C). Full Cure-300°-340°F (160°-171°C) for 1 1/2 – 2 minutes.
Additives–NX6390 Viscosity Reducer 1-3% by weight.
Storage–30C/84F in tightly closed containers
Cleaning–Enviro Series TR Blend or Mineral Spirits
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request