NX6392 Suede Additive


Ideal Fabric–100% Cotton or on appropriate underbase for blended or 100% polyester fabrics.

Mesh–Consult TDS for ink that the additive will be mixed into.

Squegee–70 durometer or 70/90/70 Triple Durometer.

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing–Consult TDS for ink that the additive will be mixed into.

Additives–NX6390 Viscosity Reducer 1-3% by weight.

Storage–30C/84F in tightly closed containers

Cleaning–Enviro Series TR Blend or Mineral Spirits


Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request