A reducer that can be used to lower viscosity, or, as a print softener
in all finished NX System inks. Increments of up to 3% by weight can
be added to finished inks without affecting the cure or colour
strength. Mixture should be thoroughly stirred after adding to
ensure proper mixture.
Ideal Fabric— N/A
Stencil–Any stencil compatible with plastisol ink
Always test finished prints for color accuracy, curing, adhesion, opacity, crocking, stretch and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any pigment or additive other than an Evolution Pigment Concentrate or Evolution NX System additive that has been manufactured by Lancer Group International is used in this ink. Contamination can also occur from mixing tools, mixing buckets, spatulas, squeegees, or flood bars that have had prior contact with inks containing PVC’s or phthalates and these tools must be thoroughly cleaned before using with the NX System.