Evolution2 Pigment Concentrates are a set of 26 highly-concentrated pigments used to tint or add color to Evolution2 bases and the newest Evolution2 bases called the N System Bases. Evolution2 bases include 6400 High StretchBase, 6551 Base, 6700 Metallic Base, 6820 Puff Mixing Base, 6825 Foam Base, 6835 High Density Base, 6835 High Density Clear Base, 7504 SportPro Base and 7551 ColorPro Mixing Base. Evolution2 N System Bases N6504, N6505 and N6550 have replaced the previous formulations numbered 6504, 6505 and 6550.

ColorPro Software may be used to mix all standard Evolution2 colors, all Pantone© C Colors and any special mix that may be needed. Contact Lancer Group International or your local dealer to obtain a copy of this software.


Mesh—Mesh size will be determined after pigment concentrates are mixed into the appropriate Evolution2 Base and after consideration of artwork and desired end result of decoration.
Curing—Evolution2 Pigment Concentrates will not cure by themselves. Do not print without adding to the appropriate base in the amounts specified in the ColorPro software.
Reducer—Do not add Curable Reducer 6501 until viscosity is evaluated after mixing into the appropriate base.
Mixing–Do not overload bases with pigments. Evolutions2 pigments are highly-concentrated. Recommended pigment loads in the appropriate Evolution2 base is 15% and at no time should ever exceed 20% by weight. Over-pigmentation of base could result in crocking or curing problems. Color accuracy should be evaluated by printing through same mesh size on like substrate after complete curing. Crock testing should be done no sooner than 72 hours after curing.
Colours–Yellow PY, Yellow HR, Red X, Red YS, Red BBC, Red 481, Red 254, Magenta, Lithol Rubine, Green YS, Green BS, Black,Orange,Violet, Ultra Marine Blue, Blue GS, White Super Strength, White Regular Strength, Fluorescent Blue, Fluorescent Green, Fluorescent Magenta, Fluorescent Orange, Fluorescent Pink, Fluorescent Red, Fluorescent Violet, Fluorescent Yellow.


Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.