Lancer Group’s STI7902 Viscosity Reducer is specially formulated to be used with any silicone ink in both the Direct Print and Transfer Series ink systems. When necessary, add a maximum of 3-4% by weight and mix thoroughly. It is not necessary to add catalyst to this product.
STI7902 is part of the STI Silicone Heat Transfer System. Other components in this system that are necessary to produce silicone heat transfers are PET Film, STI7940 Stretch Clear, STI7960 White, STI7933 Colours, STI7935 High-Density White and high-density colours, STI7938 High-Density Clear, STI7941 Stretch Underbase, and T-1 Adhesive Powder. Note: All components besides STI7902 and T-1 Powder must be catalyzed prior to printing.
TECHNICAL INFORMATION
Ideal Fabric— 100% Polyester Performance wear fabrics.
Mesh–83-125/inch (32T-48Tcm) High Density Inks – 83-125/inch (43T-48Tcm)
Squegee–70 durometer or 70/90/70 Triple Durometer.
Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.
Curing–250-290F (125-147C) for 1.5 to 2 minutes.
Additives–Viscosity Reducer 3-4% by weight maximum
Storage–30C/84F in tightly closed containers
Cleaning–Enviro Series TR Blend or Mineral Spirits
CAUTION
Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.