(800) 665-4875 (800) 498-6675

Evolution NX System EVPC Pigment Concentrates

Evolution Pigment Concentrates are a set of 26 highly-concentrated pigments used to tint or add color to Evolution NX System bases. Evolution NX System bases include NX6504 Transparent Base, NX6505 Process Base, NX6550 Opaque Base, NX6551 Opaque Mixing Base, NX6700 Metallic Base, NX6820 Puff Mixing Base, NX6825 Foam Base, NX6835 High Density Base, NX6838 High Density Clear Base.


Software–ColorPro Software may be used to mix all standard Evolution NX colors, all PantoneĀ© C Colors and any special mix that may be needed. Contact Lancer Group International or your local dealer to obtain a copy of this software.

Mesh–Mesh size will be determined after pigment concentrates are mixed into the appropriate Evolution NX Base and after consideration of artwork and desired end result of decoration.

Curing–Evolution Pigment Concentrates will not cure by themselves. Do not print without adding to the appropriate base in the amounts specified in the ColorPro software.

Reducer–Do not add Curable Reducer NX6930 until viscosity is evaluated after mixing into the appropriate base.

Mixing–Do not overload bases with pigments. Evolutions pigments are highly-concentrated. Recommended pigment loads in the appropriate Evolution base is 15% and at no time should ever exceed 20% by weight. Over-pigmentation of base could result in crocking or curing problems. Color accuracy should be evaluated by printing through same mesh size on like substrate after complete curing. Crock testing should be done no sooner than 72 hours after curing.

Colours–Yellow PY, Yellow HR, Red X, Red YS, Red BBC, Red 481, Red 254, Magenta, Lithol Rubine, Green YS, Green BS, Black,Orange,Violet, Ultra Marine Blue, Blue GS, White Super Strength, White Regular Strength, Fluorescent Blue, Fluorescent Green, Fluorescent Magenta, Fluorescent Orange, Fluorescent Pink, Fluorescent Red, Fluorescent Violet, Fluorescent Yellow.

Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request.

Revised 4/10/16