Lancer H series powders are heat activated adhesives that can be used for virtually any application requiring a heat applied system. When applied to transfers printed with Excalibur plastisol, Hydro Trans water-based, Evolution NX and Evolution STI Silicone inks it greatly increases the washability and adhesion to garments made of synthetic fabric and natural fibres. All powders are available in quart (500g), gallon (2kg) and 5 gallon (10kg) containers.
FEATURES AND BENEFITS
- Available in different size grinds to accommodate transfers with fine detail or large, solid areas.
- Easily melts enabling normal plastisol transfer temperatures to be utilized.
- Completely phthalate-free and lead-free formulation complies with all standards of Consumer Product Safety Improvement Act (CPSIA) banning phthalates and heavy metals in textile-printing inks.
H-1–A medium-grind hot -melt powder. Melts quickly and is an ideal choice where fast application is required.
H-10–A very fine grind hot-melt powder. This size grind is ideal for extremely fine detailed transfers where you cannot afford to have fine lines get lost or pulled off.
H-15–An extremely coarse grind hot-melt powder. It is used primarily for covering large areas such as crests or badges. Large particle size makes this powder easy to handle providing strong bonds to large, solid areas.
H-23–Multi-grind formula meaning it contains all size particles and is ideal for flock transfers.
Transfers—Sprinkle H powder on the wet ink, shake off excess and heat cure.
Crests—Sprinkle H powder onto back of crest and heat cure until adhesive has melted.
Flock Transfers—Sprinkle H-23 onto wet adhesive, shake off excess and heat cure to melt the powder.
Puff Transfers (Plastisol or Water-Based)—Sprinkle H powder onto the wet ink, shake off excess and heat cure at low temperature.
Always test finished prints for curing, adhesion, bleed-resistance, ink film thickness and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this product will test phthalate-free if used with any ink or product other than an ink or product manufactured by Lancer Group International. Test results by a third-party laboratory verifying all inks manufactured by Lancer Group International are phthalate-free and lead-free are available upon request.