Lancer T series hot-melt powders are heat activated adhesives that can be used for virtually any application requiring a heat applied system. When applied to transfers printed with Excalibur plastisol, Hydro Trans water-based, Evolution NX and Evolution STI Silicone inks it greatly increases the washability and adhesion to garments made of synthetic fabric or natural fibres. All powders are available in quart (500g), gallon (2kg) and 5 gallon (10kg) containers.

FEATURES AND BENEFITS

  • Available in different size grinds to accommodate transfers with fine detail or large, solid areas.
  • Easily melts enabling normal plastisol transfer temperatures to be utilized.
  • Completely phthalate-free and lead-free formulation complies with all standards of Consumer Product Safety Improvement Act (CPSIA) banning phthalates and heavy metals in textile-printing inks.

 COMPONENTS

T-1–A medium-grind particle adhesive powder that increases the durability, washability and elongations of sports transfers.  It produces especially good results when used in combination with the STI Silicone Transfer System.

T-10— A fine-grind particle adhesive powder that increases the durability, washability and elongations of sports transfers.  It produces especially good results when used in combination with the STI Silicone Transfer System.

TECHNICAL INFORMATION

Transfers—Sprinkle T powder on the wet ink, shake off excess and heat cure.

Crests—Sprinkle T powder onto back of crest and heat cure until adhesive has melted.

Puff Transfers—Sprinkle T powder on wet ink, shake off excess and heat cure at low temperature.

CAUTION

Always test finished prints for curing, adhesion, bleed-resistance, ink film thickness and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this product will test phthalate-free if used with any ink or product other than an ink or product  manufactured by Lancer Group International.  Test results by a third-party laboratory verifying all inks manufactured by Lancer Group International are phthalate-free and lead-free are available upon request.