311 Quick Strip is fast-acting biodegradable stencil remover for efficient removal of direct
emulsion & capillary films. 311 Quick Strip is highly concentrated. Dilute with water – 20 parts
water to 1 part 311 Quick Strip concentrate. Made from natural ingredients, 311 Quick Strip
doesn’t contain any harmful, or corrosive solvents or chemicals continuing Lancer’s Group
dedication to the environment and safety of our customers.


Ideal Fabric— N/A

Mesh— N/A

Squegee— N/A

Stencil–Any PVC-free or phthalate-free emulsion compatible with plastisol inks.

Curing— N/A

Additives— N/A

Storage–30C/84F in tightly closed containers

Cleaning— N/A

Directions for Use:
Spray and brush into both sides of screen fabric. Let stand for a few minutes and wash away
with water using a high-pressure washing system. NOTE: Do not let 311 Quick Strip dry on
the screen as it will harden the emulsion and make stencil removal difficult or impossible.


Always test finished prints for curing, adhesion, opacity, bleed-resistance and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this ink will test PVC-free or phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are PVC-free, phthalate-free and lead-free are available upon request