Excalibur

Table of Contents Technical Data Sheet SDS

960PF Series Hot-Peel Transfer Ink

960PF Series Hot-Peel transfer inks have been formulated to produce high-opacity transfers when the ink is used in combination with coated transfer papers. Because the coating on the paper releases the entire ink film is transferred to the garment. Prints will be very opaque while still maintaining a soft feel on the garment. All 960PF Series inks contain a built-in powder to ensure adhesion and durability of the transferred print. Available in over 30 standard colours, 8 fluorescent colours, a ready-for-use colour mixing system as well as a base and pigment colour mixing system. The 960PF Series is also available in 19 special-effects inks ranging from glitters, metallics and glow in the dark.

FEATURES AND BENEFITS

  • Entire ink film transfer to the shirt to increase opacity and easily cover 100% cotton dark backgrounds.
  • Adhesive powder mixed in formula ensures adhesion and durability for long lasting enjoyment of garment.
  • Glitters, metallics and a glow in the dark ink are available to produce special effects hot-split transfers.
  • Completely phthalate-free and lead-free formulation complies with all standards of Consumer Product Safety Improvement Act (CPSIA) banning phthalates and heavy metals in textile-printing inks.

TECHNICAL INFORMATION
Gel Temperature: Ink will gel on surface at 240° F (116° C).
Transfer Temperature:  Transfer with medium pressure at 375° F-400° F (191° C to 204° C for 5 to 12 seconds.
Papers: Any coated paper designed to be used with hot-peel transfer inks.  Always pre-shrink paper by running through oven or putting in a “hot box” prior to running production.  This is especially important to ensure accurate registration of multi-color designs. Special-Effects inks require papers designed for metallic inks.
Mesh: Mesh counts between 74--160/inch (30T-64Tcm) may be used and choice of mesh will be dependent upon detail in design and opacity level required..
Stencil: Any emulsion compatible with plastisol inks.
Modification: After thoroughly stirring ink in container , if necessary add a maximum of 5% 501PF Curable Reducer.  Amounts higher than this could reduce opacity and film strength of transferred designs..
Squeegee: 70 durometer or 90/70/90 triple durometer blades are recommended.
Clean-up: Use Enviro Series 2000 Green or Enviro Series TR Blend.

COLOURS
Standard Colours—Lemon Yellow, Light Gold, Gold, Orange, Bright Orange, Candy Red, Bright Red, Scarlet, Super Red, Crimson, Maroon, Fuschia, Violet, Purple, Navy, Royal Blue, Light Royal, Reflex Blue, True Blue, Bright Blue, Light Blue, Bright Dallas Green, Kelly Green, Fresh Green, Hunter Green, Forest Green, Flesh, Dark Brown, Silver Grey, Black, Fluorescent Yellow, Fluorescent Orange, Fluorescent Red, Fluorescent Pink, Fluorescent Magenta, Fluorescent Blue, Fluorescent Green, and Fluorescent Violet.

961PF Series ColorPro RFU Colour Mixing System—Yellow G/S, Yellow R/S, Red Y/S, Red B/S, Fluorescent Magenta, Violet, Blue G/S, Blue R/S, Green, Black,

960PF ColorPro PC Colour Mixing System-960PF Mixing Base, Yellow PY, Yellow HR, Orange, Red 481, Red Y/S Red X, Red BBC Lithol Rubine, Blue G/S, Ultra Marine Blue, Green Y/S, Green B/S, Violet, Magenta, Black, White (Regular Strength), White (Super Strength), Fluorescent Yellow, Fluorescent Orange, Fluorescent Red, Fluorescent Pink, Fluorescent Magenta, Fluorescent Blue, Fluorescent Green, and Fluorescent Violet.

Special Effects Bases and Colours: Metallic Copper, Metallic Green, Metallic Purple, Metallic Red, Metallic Royal, Metallic Gold Sparkle, Metallic Old Gold, Metallic Silver, Gold Gilitter, Silver Glitter, Techno Silver Glitter, Gold Dust Glitter, Electric Green Glitter, Ice Wine Glitter, Fire and Ice Glitter, Ice Blue Glitter, Crystallina, Glow-in-th-Dark, Metallic Clear Base.

CAUTION
Always test finished prints for curing, adhesion, bleed-resistance, ink film thickness and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that standard colours or mixed inks will test phthalate-free if any additive other than an additive manufactured by Lancer Group International is used to modify this ink. Test results by a third-party laboratory verifying all components used to produce this ink are phthalate-free and lead-free are available upon request.